13
Start or stop switching: when the experiment starts, it shows that the experiment has
started, otherwise it shows that the experiment has stopped
Print: you can print the latest set of experimental data. This function is disabled when
starting the experiment.
Exit: return to the main interface.
2.preparation
1.Clean
Before each experiment, clean the cup.
2.Sample preparation
Shake the sample before the experiment.
Pour the sample into the scale line of the test cup, and there are two graduation lines.
Select the scale line according to the sample.
3.Start experiment
Set the method parameters for the experiment in the method setting interface, save
and exit.
Select the method for this experiment in the analysis interface.
Enter the number of the test sample in the analysis interface.
Wait for the bath temperature to reach the temperature set in the method.
Put the sample cup in the heating bath.
