Huazheng HZJY-10K-I, Manual

Page: 6 / 9

4
number Description number Description
1 AC plug 2 AC ON
3 Test Port
（
E
、
G
、
L
）
4 LCD display
5 Key
●
Key and function
Key numbered from left to right, the first for a total of five off down the power Key.
key number Description
1 Press the switch on button startup, shutdown condition
2
、
3
、
4 functional key
5
The TEST key, press and hold 1 s TEST, then stop (enter the
Settings menu is invalid)
●
Test setup interface
Set test voltage SetThe test time Battery Indicator
Set Short Current Set the filter
Button function tip
Soft key Description
OFF Power Off (No operation, 3 minutes automatic shutdown)
H.V Set test voltage: 500V
、
1000V
、
2500V
、
5000V
、
10000V
TIME SetThe test time: 00:30 01:00 10:00 30:00
Switching software keys to a new function, or from other
function to return
I
Set Short Current
，
1 mA step selection Usually according to
the maximum, can also according to the regulations stipulated
by the short circuit current value choice.
Filter
Set the filter:
0
：
without filtering; (no interference case recommended)
1
：
hardware low-pass filter; (applicable to most situations)
2
：
software Low pass filter;High resistance (greater than 100G
recommended choose)
3
：
ha software low-pass filter;
(high resistance is greater than 1T recommend choose)
HELP About Tester message

Battery Indicator
： 、 、 、 、