---
---
67
Three-phase energy meter field calibrator
3.86. Charge the battery
Charge the instrument battery, which takes about 8 hours until the battery is fully charged; the
full battery can maintain the instrument to keep 4-hour uninterrupted work.
Connect the red charging cable to any of the instrument’s A, B, C-phase voltage terminal
ports, and connect the black cable to COM port of the instrument;
Open the instrument, press
【
SYST
】
key, and then press 6 to enter the charging management
interface;
Connect to 220V voltage, and the instrument’s charge interface will display the instrument’s
battery voltage and charging current parameter. When the battery voltage reaches 4.2V, the
battery has been fully charged.
As shown above:
Summary of Contents for HZGC3521 Series
