3
long press for 3 seconds)
、
Mute on / off
、
Connect the socket, connect the
sensor
、
Connect the socket, connect the headset
IV. On-site installation and operation of HZ-B cable
fault precise determination point tester
HZ-B cable fault precise determination point tester is turned on, sensor preparation
1.
Connect the sensor to a suitable probe or probe
The HZ-B sensor can be connected to two different probes. The standard
configuration includes an 18mm long hard ground probe and a 75mm long grass probe.
The above probes and probes can be screwed on to suit various ground cover conditions.
2.
Connect the sensor to the handle
The figure below shows how to connect the adjustable handle to the sensor
：
3. Adjust the height of the handle
