WA603DE & WA653DE
Fat AP Configuration Guide
4 Upgrade and Maintenance
Issue 02 (2012-04-19)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
29
3.
Click
supportinfo.txt
to download the log file to the local computer.
----End
4.5 Configuring the Access Modes
The AP supports four access modes: Telnet, SSH, HTTP, and HTTPS. To configure the access
modes, choose
Administration
>
Management
from the left navigation tree, and enable or
disable the access modes as required, as shown in
Figure 4-9
.
Figure 4-9
Selecting access modes
4.6 Verifying Network Connections
An AP provides the following methods to check whether devices connected to the AP have
connected to the network:
z
Ping: This method can only identify whether a device is connected to a network. If a
device is not connected, this method cannot help locate the problem.
z
Traceroute: The Traceroute is a tool used to trace the route that a packet follows to reach
the destination device on the network. It identifies the gateway that the packet passes and
helps locate the problem if the connection fails. By default, the packet is 38 bytes.
Ping
1.
Choose
Administration
>
Diagnostics
from the left navigation tree.
The page shown in
Figure 4-10
is displayed.
