WA603DE & WA653DE
Fat AP Configuration Guide
2 Basic Configuration
Issue 02 (2012-04-19)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
5
2.
Configure common parameters according to
Table 2-1
.
Table 2-1
Description of common parameters
Parameter
Description
Radio Network
Name of the wireless network. The name cannot exceed 32 characters.
The default name is
Radio 2.4G
or
Radio 5G
.
Wireless Mode
Wireless mode. A single-frequency AP can only use 2.4 GHz, and
dual-frequency AP can use either 2.4 GHz or 5 GHz.
Channel
Wireless channel. Select
SmartSelect
or any channel.
Channel Width
Channel bandwidth. Select 20 MHz or 40 MHz.
Country Code
Name of the country where the AP is used.
AeroScout RFID
tag detection
Whether to detect the AeroScout RFID tag. To detect the tag, select
Enabled
. By default,
Disabled
is selected.
3.
(Optional) Click
Edit Common Settings
in the
Advanced Settings
area and configure the
parameters as shown in
Figure 2-3
according to
Table 2-2
.
Figure 2-3
Configuring advanced parameters
Table 2-2
Description of advanced parameters
Parameter
Description
Transmit Power
Transmit power of wireless signals. The options are as follows:
z
Full: full transmission power
z
Half: half of the transmission power
z
Quarter: a quarter of the transmission power
z
Eighth: eighth of the transmission power
z
Minimum: minimum power
The default value is
Full
.
