36
Registering Local Information
Chap
te
r 2
Regis
tra
tion
and
S
e
tu
p
Save Phone Book
Saves the data in the Phone Book in a “Memory Stick”.
The data in the “Memory Stick” will be overwritten.
Load Phone Book
Loads the data in the Phone Book from a “Memory Stick”.
The data in the Phone Book will be overwritten.
Create Private Phone Book
Selects to create an empty folder and file for a Private
Phone Book in an inserted “Memory Stick”.
Delete Private Phone Book
Selects to delete the Private Phone Book folder in the
inserted “Memory Stick”.
Copy to Private Phone book
Selects to copy all the contents of the Phone Book to a
Private Phone Book in the inserted “Memory Stick”.
Auto Dialing
You can create a Private Phone Book in a “Memory Stick”.
This item is used to select whether or not to automatically
dial the address of a single contact on a specified list in the
Private Phone Book simply by inserting the “Memory
Stick”.
On:
Enables automatic dialing.
Off:
Disables automatic dialing.
Page 2/11
Gatekeeper Mode
Sets whether you use the gatekeeper that controls access to
a remote party.
Using the gatekeeper allows you to dial using the user
name or user number.
Auto:
Detects the gatekeeper automatically and uses it.
On:
Enables use of the gatekeeper.
Off:
Disables use of the gatekeeper.
Gatekeeper Address
Enter the gatekeeper address used when “Gatekeeper
Mode” is set to “On”.
User Alias
Enter the user name (H.323 alias) to be registered in the
gatekeeper.
User Number
Enter the user number (E.164 number) to be registered in
the gatekeeper.
Page 3/11
SNMP Mode
Selects whether the SNMP (Simple Network Management
Protocol) agent service is enabled or not.
On:
Enables the SNMP agent service.
Off:
Disables the SNMP agent service.
Changes made in the SNMP Mode setting take effect after
restarting.
Trap Destination
Enter the address of the trap destination SNMP manager.
Community
Enter the community name managed by the SNMP
manager. The default setting is “public”. Normally, there
is no need to change.
Description
Enter the description of this system. The default setting is
“Videoconference Device” and cannot be changed.
Location
Enter the location where this system is installed.
Contact
Enter information on the administrator of this system.
Gatekeeper Mode
Off
Gatekeeper Address
User Alias
User Number
Administrator Setup
Right-click the mouse to display a help message.
Cancel
OK
IP:012.345.678.912
2/11
Note
Videoconference Device
public
On
Off
SNMP Mode
Trap Destination
Community
Description
Location
Contact
Administrator Setup
Right-click the mouse to display a help message.
Cancel
OK
IP:012.345.678.912
3/11
