Materials for Installation
You can install the device in a cabinet or on a workbench.
If a workbench is adopted, you just need to place the device on it
This document describes how to install the device to a cabinet an
Besides the chassis mounting ears and guide rails the following
Besides the chassis, mounting ears, and guide rails, the following
supported, refer to the
Hardware Description
. You can purchase
From left to right: captive nut, M6 screw, M4 screw
The numbers of captive nuts and screws vary with installa
DC power cable
AC powe
Console cable
Network
LC-PC multimo
LC-LC single-mode optical fiber
4
t if it is clean. For details, refer to the
Installation Guide
.
nd materials required.
g materials are used in this example For interface cards
g materials are used in this example. For interface cards
and install interface cards and complimentary cables as required.
tion modes.
PGND cable
er cable
Cable-retention clip
k cable
SFP optical module
ode optical fiber
4
