Huawei SUN2000L Series Page 131 User Manual Download

Page: 131 / 151

SUN2000L-(2KTL-5KTL)
User Manual

7 Operations on the Local FusionHome App

Issue 02 (2017-12-12)

Huawei Proprietary and Confidential

124

7.6 Troubleshooting

Table 7-18

Common faults and troubleshooting measures

Symptom

Possible Cause

Measures

The app fails to be installed
on an Android mobile
phone.



The version of the
mobile phone operating
system is earlier than the
required version.



Allow Installation of
apps from unknown
source

is not selected.



Upgrade the version of
the mobile phone
operating system.



Choose

Settings

Security

and select

Allow Installation of
apps from unknown
sources

The communication fails.

The mobile phone or router
is more than 5 meters away
from the SUN2000L, so the
WiFi connection is
disconnected.

Keep the mobile phone or
router within 5 meters of the
SUN2000L and reconnect
the WiFi connection.

The

Failed to connect to

the inverter.
Reconnecting ...

message is

displayed.

The mobile phone or router
is more than 5 meters away
from the SUN2000L, or the
WiFi signal is weak.

Ensure that the WiFi
network is connected. Log
out of the app and then log
in again.

Data fails to be obtained
during operations.

Connection to the
SUN2000L is disconnected.

Reconnect to the
SUN2000L.

The SUN2000L list fails to
be obtained.

An error occurs in the WiFi
connection to the app.

If the list still cannot be
obtained after several
attempts, log out. Then log
in and try again.

No upgrade package is
available for an upgrade.

No upgrade package is
saved in the mobile phone.

Save the upgrade package in
the mobile phone.

Summary of Contents for SUN2000L Series
























































































































































Search results

Summary of Contents for SUN2000L Series

Reviews:

Related manuals for SUN2000L Series

Brands by name

Popular brands

Huawei SUN2000L Series, User Manual

Search results

Summary of Contents for SUN2000L Series

Reviews:

Related manuals for SUN2000L Series

Brands by name

Popular brands