SUN2000L-(2KTL-5KTL)
User Manual
7 Operations on the Local FusionHome App
Issue 02 (2017-12-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
89
Set the grid code that applies to the country or region where the PV plant is located and the
SUN2000L model.
If there is no need to connect to the router or management system, skip relevant steps.
After the management system is successfully connected, the SUN2000L will report the SN
and installer registration code. If the connection fails, another connection attempt will start
after 10 seconds. The installer registration code is generated by the SUN2000L
automatically and is used for the installer to register with the management system and
manage the inverter.
For the operations about how to add devices, see
7.4.3.1 Adding/Deleting Devices
After quick setting is complete, tap
Switch to Router WiFi
to switch to the
Available
WiFi networks nearby
screen and tap the corresponding router WiFi connection to switch
to the router WiFi network.
To connect to the router WiFi network from the mobile phone system after router
parameters are successfully set, you need to log out of the app and log in again.
After following all the instructions on the
Quick setting
screen, tap
Save settings
to store
the configurations or tap
Return to home
to return to the
Operation console
screen.
----End
Method 2: use the saved file
Before choosing
Use saved file
for quick setting, ensure that the corresponding configuration
file is saved in your mobile phone. To generate a configuration file, tap
Save settings
on the
Quick setting
screen.
Step 1
Choose
Quick setting
>
Use saved file
from the
Operation console
screen and perform
deployment by following the instructions.
