Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.
1
1
Product Overview
1. The information in this document is subject to change without notice. Every effort has been
made in the preparation of this document to ensure accuracy of the contents, but all
statements, information, and recommendations in this document do not constitute a warranty
of any kind, express or implied.
2. Before device installation, carefully read the
SUN2000-(33KTL, 36KTL, 40KTL)-US User
Manual
. You can log in to http://support.huawei.com/carrier/, and search for
SUN2000
on the
Product Support
tab page to view or obtain the user manual.
3. Only qualified and trained electrical technicians are allowed to operate the device. Operators
should understand the components and functioning of a grid-tied PV power system and be
familiar with relevant local standards.
4. Before installing the device, check that deliverables are intact and complete against the
packing list
. If any damage is found or any component is missing, contact the dealer.
5. Use insulated tools when installing the device. For personal safety, wear insulation gloves and
protective shoes.
6. Huawei shall not be liable for any consequence caused by violation of the storage,
transportation, installation, and operation regulations specified in this document and the user
manual.
Waterproof cable connector is abbreviated as waterproof connector in the following text.
(1) PV connection indicator
(2) Grid-tied indicator
(3) Communication indicator
(4) Alarm/Maintenance indicator
(5) Maintenance compartment door
(6) Host panel
Front View
Ports
(1) 3/4-inch waterproof cable connectors
(COM1, COM2, and COM3)
(2) 2-inch waterproof cable connector (AC OUTPUT)
(3) USB port (USB)
(4) DC switch 1 (DC SWITCH 1)
(5) DC switch 2 (DC SWITCH 2)
(6) 1/2-inch waterproof cable connector (RESERVE)
(7) DC input terminals (controlled by DC
SWITCH 1)
(8) DC input terminals (controlled by DC SWITCH 2)
(9) PV side ground point (GND)
NOTICE
NOTE
