manualshive.com logo in svg

Huawei SUN2000-20KTL-M3, User Manual

Share
Download
Huawei SUN2000-20KTL-M3 User Manual Download Page 38

Figure 5-3 Connecting the PE cable

(1) Standby protection ground point

 

----End

5.4 Connecting the AC Output Power Cable

Precautions

An AC switch must be installed on the AC side of the SUN2000 to ensure that the

SUN2000 can be safely disconnected from the power grid.

WARNING

Do not connect loads between the SUN2000 and the AC switch.

NO TICE

● Use a socket wrench and extension rod to connect the AC power cable. The

extension rod must be longer than 100 mm.

● Sufficient slack should be provided in the PE cable to ensure that the last cable

bearing the force is the PE cable when the AC output power cable bears pulling

force due to force majeure.

● Do not install third-party devices in the AC connection box.
● You need to prepare M8 OT terminals by yourself.

SUN2000-(20KTL, 29.9KTL, 30KTL, 36KTL, 40KTL)-

M3

User Manual

5 Electrical Connections

Issue 01 (2020-10-15)

Copyright © Huawei Technologies Co., Ltd.

32

Summary of Contents for SUN2000-20KTL-M3
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands