Site Requirements
●
The SUN2000 should be installed in a well-ventilated environment to ensure
good heat dissipation.
●
If the SUN2000 is installed in a place exposed to direct sunlight, the power
may decrease as the temperature rises.
●
You are advised to install the SUN2000 in a sheltered place or install an
awning over it.
Mounting Structure Requirements
●
The mounting structure where the SUN2000 is installed must be fire resistant.
●
Do not install the SUN2000 on flammable building materials.
●
The SUN2000 is heavy. Ensure that the installation surface is solid enough to
bear the weight load.
●
In residential areas, do not install the SUN2000 on drywalls or walls made of
similar materials which have a weak sound insulation performance because
the noise generated by the SUN2000 is noticeable.
Installation Angle Requirements
The SUN2000 can be wall-mounted or support-mounted. Requirements for the
installation angle:
●
Install the SUN2000 vertically or at a maximum back tilt of 15 degrees to
facilitate heat dissipation.
●
Do not install the SUN2000 with a front tilt, excessive back tilt, side tilt,
horizontally, or upside down.
Figure 4-1 Installation angle
Installation Space Requirements
●
Reserve enough clearance around the SUN2000 to ensure sufficient space for
installation and heat dissipation.
SUN2000-(20KTL, 29.9KTL, 30KTL, 36KTL, 40KTL)-
M3
User Manual
4 Installation
Issue 01 (2020-10-15)
Copyright © Huawei Technologies Co., Ltd.
19
