Huawei SUN2000-20KTL-M3 User Manual Download Page 17

Page: 17 / 95

NO TE

The nameplate figure is for reference only.

Enclosure Labels

Symbol

Name

Description

Delay discharge

Residual voltage exists

after the SUN2000 is

powered off. It takes 5

minutes for the

SUN2000 to discharge

to the safe voltage.

Burn warning

Do not touch a

running SUN2000

because it generates

high temperatures on

the shell.

Electric shock warning

● High voltage exists

after the SUN2000

is powered on. Only

qualified and

trained electrical

technicians are

allowed to perform

operations on the

SUN2000.

● High touch current

exists after the

SUN2000 is

powered on. Before

powering on the

SUN2000, ensure

that the SUN2000

is properly

grounded.

Refer to

documentation

Reminds operators to

refer to the documents

delivered with the

SUN2000.

Grounding label

Indicates the position

for connecting the PE

cable.

Operation warning

Do not remove the DC

input connector or AC

output connector with

power on.

SUN2000-(20KTL, 29.9KTL, 30KTL, 36KTL, 40KTL)-

User Manual

2 Overview

Issue 01 (2020-10-15)

Summary of Contents for SUN2000-20KTL-M3
































































































Search results

Summary of Contents for SUN2000-20KTL-M3

Reviews:

Brands by name

Popular brands

Huawei SUN2000-20KTL-M3, User Manual

Search results

Summary of Contents for SUN2000-20KTL-M3

Reviews:

Brands by name

Popular brands