manualshive.com logo in svg

Huawei SUN2000-20KTL-M3, User Manual

Share
Download
Huawei SUN2000-20KTL-M3 User Manual Download Page 37

NO TE

● The PE point at the AC output port is used only as a PE equipotential point, not a

substitute for the PE point on the enclosure.

● It is recommended that silica gel or paint be applied around the ground terminal after

the PE cable is connected.

Procedure

Step 1 Crimp OT terminals.

NO TICE

● Avoid scratching the core wire when stripping a cable.
● The cavity formed after the conductor crimp strip of the OT terminal is crimped

must wrap the core wires completely. The core wires must contact the OT

terminal closely.

● Wrap the wire crimping area with heat shrink tubing or PVC insulation tape.

The heat shrink tubing is used as an example.

● When using a heat gun, protect devices from being scorched.

Figure 5-2 Crimping an OT terminal

(1) Cable

(2) Core

(3) Heat shrink tubing

(4) OT terminal

(5) Crimping tool

(6) Heat gun

 

Step 2 Connect the PE cable.

SUN2000-(20KTL, 29.9KTL, 30KTL, 36KTL, 40KTL)-

M3

User Manual

5 Electrical Connections

Issue 01 (2020-10-15)

Copyright © Huawei Technologies Co., Ltd.

31

Summary of Contents for SUN2000-20KTL-M3
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands