43
z
Destination Port From:
Enter the starting port ID (or a
range) that you expect to see on incoming packets
destined for the LAN computer for which this rule is being
created. With the ending port ID (or a range) specified in
the next field, incoming traffic that meets these criteria will
be redirected to the Local Port number you specified.
z
Destination Port To:
Enter the ending port ID (or a range).
III.
Save
z
Click the
Submit
button to save the settings in the RAM.
z
To save these configuration changes permanently, enter
the
Save & Reboot
page, select
Save
and click
Submit
button to save new settings.
4.10
ATM Traffic
ATM traffic is the traffic at asynchronous transfer mode.
Click the
ATM Traffic
of
Other Setting
in the Wizard Column to
configure the ATM traffic description.
I.
Configuration page
Figure 4-21
ATM traffic
Summary of Contents for SmartAX MT800
