37
4.8
IP Route Table Configuration
Click the
IP Route
of
Other Setting
in the Wizard Column to set
the IP Route Table.
IP Routes are used to define gateways and hops used to route
data traffic. Most users will not need to use this feature as the
previously configured default gateway and LAN IP settings on your
host computers should be sufficient.
You may need to define routes if your LAN includes two or more
networks or subnets, if you connect to two or more ISP services, or if
you connect to a remote corporate LAN. Use the IP Route Table to
add new IP routes.
I.
Configuration page
Figure 4-16
IP Route Table
II.
Parameter explanation
z
Destination:
Specifying the IP address of the destination
computer. The destination can specify the IP address of a
specific computer or an entire network. It can also be
specified as all zeros to indicate that this route should be
Summary of Contents for SmartAX MT800
