RMS-SNMP01B SNMP Card
User Manual
4 Managing the UPS on the WebUI
Issue 10 (2020-03-20)
Copyright © Huawei Technologies Co., Ltd.
29
Figure 4-23
Modify User page
Idle Timeout Logout
You can set
Allowed timeout (min)
, as shown in
. After the specified time, you
are logged out.
Figure 4-24
Idle Timeout Logout
4.6.3 Site Config Page
On the
Site Config
page, set the system date, time, and time zone, and choose whether to
synchronize the Windows time, as shown in
. The SNMP card can synchronize
time from the NTP server using the RFC868, NTPv3, or RFC1305 protocol to the local time.
To enable this, specify a valid NTP server IP address and click
Submit
for the setting to take
effect, as shown in
. The SNMP card can also synchronize time from the
NetEco1000U. To enable this, select a valid NetEco1000U IP address from the address list
and click
Submit
for the setting to take effect, as shown in
You can set
System name
(
ups2000
as default),
System location
(
Not Configure System
Location
as default), and
Contact person
(
Not Configure System Contact
as default) on the
WebUI.
The SNMP card supports Secure Sockets Layer (SSL) certificate import, as shown in
. The certificate is used for SSL encryption protection during WebUI login. Apply to a
third-party institution for the certificate.
