manualshive.com logo in svg

Huawei quidway s7700, Configuration Manual

The Huawei Quidway S7700 is a high-performance network switch designed for seamless connectivity. With our comprehensive Configuration Manual, users can easily understand and optimize their network settings. Download the manual for free from our website and unlock the full potential of your Huawei Quidway S7700.

Share
Download
background image

[CE2]

 interface vlanif 40

[CE2-Vlanif40]

 ip address 10.1.1.2 255.255.255.0

[CE2-Vlanif40] 

quit

Step 11

Verify the configuration.

After the preceding configurations, run the 

display vsi name a2 verbose

 command on PE1, and

you can view that the VSI named a2 has established a PW to PE2, and the VSI is in Up state.

<PE1> 

display vsi name a2 verbose

 ***VSI Name               : a2
    Administrator VSI      : no
    Isolate Spoken         : disable
    VSI Index              : 0
    PW Signaling           : ldp
    Member Discovery Style : static
    PW MAC Learn Style     : unqualify
    Encapsulation Type     : vlan
    MTU                    : 1500
    Diffserv Mode                   : uniform
    Mpls Exp               : --
    DomainId               : 255
    Domain Name            :
    Ignore AcState         : disable
    Create Time            : 1 days, 17 hours, 9 minutes, 10 seconds
    VSI State              : 

up

    VSI ID                 : 2
   *Peer Router ID         : 3.3.3.9
    VC Label               : 27648
    Peer Type              : dynamic
    Session                : up
    Tunnel ID              : 0x10020
    Broadcast Tunnel ID    : 0x10020                                           
    CKey                   : 6                                                  
    NKey                   : 5                                                  
    StpEnable              : 0                                                  
    PwIndex                : 0    
    Tunnel Policy Name     : policy1
    Interface Name         : Vlanif10
    State                  : up
    Last Up Time           : 2009/01/05 18:10:44
    Total Up Time          : 1 days, 16 hours, 53 minutes, 33 seconds
   **PW Information:
   *Peer Ip Address        : 3.3.3.9
    PW State               : up
    Local VC Label         : 27648
    Remote VC Label        : 27648
    PW Type                : label
    Tunnel ID              : 0x10020
    Broadcast Tunnel ID    : 0x10020                        
    Ckey                   : 0x6                                                
    Nkey                   : 0x5                                                
    Main PW Token          : 0x10008                                           
    Slave PW Token         : 0x0                                                
    Tnl Type               : LSP                                                
    OutInterface           : Vlanif20                                           
    Stp Enable             : 0                                                  
    Mac Flapping           : 0      
    PW Last Up Time        : 2009/01/06 10:03:35
    PW Total Up Time       : 0 days, 11 hours, 15 minutes, 38 seconds

Run the 

display mpls lsp include 3.3.3.9 32 verbose

 command on PE1, and you can view

information about the LSP to 3.3.3.9/32.

<PE1> 

display mpls lsp include 3.3.3.9 32 verbose

-------------------------------------------------------------------------------
                 LSP Information: RSVP LSP
-------------------------------------------------------------------------------

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN

7 VPLS Configuration

Issue 01 (2011-07-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

749

Summary of Contents for quidway s7700


































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for quidway s7700

D-Link NetDefend DFL-260E Reference Manual preview
NetDefend DFL-260E
Brand: D-Link Pages: 328
D-Link ShareCenter Pulse DNS-320 Quick Install Manual preview
ShareCenter Pulse DNS-320
Brand: D-Link Pages: 2
D-Link DFL-210 - NetDefend - Security Appliance Firewall Registration Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 19
D-Link DFL-M510 Faq preview
DFL-M510
Brand: D-Link Pages: 22
Dahua N300 Quick Start Manual preview
N300
Brand: Dahua Pages: 12
D-Link NetDefend DFL-1600 Quick Manual preview
NetDefend DFL-1600
Brand: D-Link Pages: 23
IBM 3708 Description preview
3708
Brand: IBM Pages: 342
3onedata IES615-2D Series Quick Installation Manual preview
IES615-2D Series
Brand: 3onedata Pages: 3
3One data 7212 User Manual preview
7212
Brand: 3One data Pages: 5
3onedata IEM615 Series Hardware User Manual preview
IEM615 Series
Brand: 3onedata Pages: 33
LaCie 8BIG RACK THUNDERBOLT 2 Quick Start Manual preview
8BIG RACK THUNDERBOLT 2
Brand: LaCie Pages: 28
Planet GSW-1602SF User Manual preview
GSW-1602SF
Brand: Planet Pages: 20
Aztech DSL5068EN(1T1R) User Manual preview
DSL5068EN(1T1R)
Brand: Aztech Pages: 40
Patton electronics SmartNode 4520 Series Getting Started Manual preview
SmartNode 4520 Series
Brand: Patton electronics Pages: 90
UfiSpace S9600-28DX Hardware Installation Manual preview
S9600-28DX
Brand: UfiSpace Pages: 34
TP-Link TL-MR3220 Quick Installation Manual preview
TL-MR3220
Brand: TP-Link Pages: 87
Paradyne Hotwire 8343 Installation Instructions Manual preview
Hotwire 8343
Brand: Paradyne Pages: 6
G&D DL-DVI-Vision-IP Series Installation And Operation Manual preview
DL-DVI-Vision-IP Series
Brand: G&D Pages: 228

Brands by name

Popular brands

Load more brands