The system view is displayed.
Step 2
Run:
vsi
vsi-name
auto
VSIs are created and the automatic member discovery mechanism is adopted.
The Kompella VPLS does not directly operate on the connection between CEs. Each CE has a
globally unique number. On a PE, a VSI is created for each CE that is directly connected to this
PE device.
Step 3
Run:
pwsignal
bgp
BGP is configured as the PW signaling protocol and the VSI BGP view is displayed.
Step 4
Run:
route-distinguisher
route-distinguisher
The RD is configured for the VSI.
After configuring BGP as the PW signaling protocol, you must configure the RD of the VSI to
validate the VSI.
Step 5
Run:
vpn-target
vpn-target
& <1-16> [
both
|
export-extcommunity
|
import-extcommunity
]
The VPN Target is configured for the VSI.
When configuring the VPN Target of the VSI, ensure that the VPN target of
export-
extcommunity
is the same as that of
import-extcommunity
.
Step 6
Run:
site
site-id
[
range
site-range
] [
default-offset
{
0
|
1
} ]
Information about the sites of the VSI is configured.
The site ID of the local end must be less than the sum of the
site-range
value and
default-
offset
value on the peer end. The site ID of the local end must be greater than the
default-
offset
value of the peer end.
NOTE
At present, the VSIs of the two dual-homed PEs can be configured with only one label block. To enlarge
the range, use the
undo site
command to delete all the original sites and then configure a larger range. In
addition, the VSIs of the two dual-homed PEs can be configured with only one AC.
Step 7
Run:
quit
The VSI view is displayed.
Step 8
Run:
quit
The system view is displayed.
Step 9
(Optional) Run:
vpls bgp encapsulation
{
ethernet
|
vlan
}
The encapsulation type is configured for the VPLS.
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
7 VPLS Configuration
Issue 01 (2011-07-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
714
