Installation Manual
Quidway S3000-EI Series Ethernet Switches
Chapter 1 Product Introduction
1-8
2 10/100/1000Bast-T interface modules CONSOLE port
Quidway S3000 Series
Power indicator
24 100M electrical port state indicator
100M electrical port state indicator
Mode switch button
24 100M electrical port
2 10/100/1000Bast-T interface modules CONSOLE port
Quidway S3000 Series
Power indicator
24 100M electrical port state indicator
100M electrical port state indicator
Mode switch button
24 100M electrical port
Figure 1-7
S3026T Switch front panel
II. Front panel indicators
The meanings of the indicators on the front panel of S3026T are described in the
following table.
Table 1-8
S3026T Switch front panel indicators
Indicator
Panel indication
Status
Description
On
The switch is powered on.
PWR
Off
The switch is powered off.
On
Redundant power is working
System state indicator
RPS
Off
Redundant power is not working
On/Blinking
Data is being sent or received.
LNK
Off
No data is being sent or received.
On
Full-duplex mode
DUP
Off
Half-duplex mode
On
100M operating mode
Fixed Ethernet port
indicators
SPD
Off
10M operating mode
III. Fixed 100M Ethernet port on the front panel
Table 1-9
Attributes of the fixed 100M Ethernet ports of S3026T Switch
Attribute
Description
Connector
RJ-45
Interface number
24
Operating mode
10M half-/full-duplex
100M half-/full-duplex
MDI/MDI-X auto-sensing
Compliant standard
IEEE 802.3u
Transmission medium and
maximum transmission distance
Category-5 twisted pair cabling with a maximum transmission distance of
100m.
IV. Console port
S3026T Switch provides a Console port compliant with EIA/TIA-232 asynchronous
serial criterion. Users can perform local or remote configuration of the switches via
this port.
