![Huawei Quidway S3000-EI Series Installation Manual Download Page 16](http://html.mh-extra.com/html/huawei/quidway-s3000-ei-series/quidway-s3000-ei-series_installation-manual_169465016.webp)
Installation Manual
Quidway S3000-EI Series Ethernet Switches
Chapter 1 Product Introduction
1-6
III. Fixed 100M Ethernet port on the front panel
Table 1-6
Attribute of the fixed 100M Ethernet port on the front panel of S3026C Switch
Attribute
Description
Connector
RJ-45
Interface number
24
Operating mode
10M half-/full-duplex
100M half-/full-duplex
MDI/MDI-X auto-sensing
Compliant standard
IEEE 802.3u
Transmission medium and
maximum transmission distance
Category-5 twisted pair cabling with a maximum transmission distance of
100m.
IV. Console port
S3026C Switch provides a Console port compliant with EIA/TIA-232 asynchronous
serial criterion. Users can perform local or remote configuration of the switches via
this port.
Table 1-7
Console port attributes
Attribute
Description
Connector
RJ-45
Standard of
interface
Asynchronous EIA/TIA-232
Baud rate
9600bps ( by default )
Services supported
Connect with character terminal
Connect with the serial port of a local terminal (which can be a PC) or a remote
terminal (through a pair of Modems) and run terminal emulation program on a
terminal.
1.3.2 Rear Panel
I. S3026C Switch rear panel
Rear panel layouts
You can find AC socket, grounding screw, and redundant power socket on the rear
panel of S3026C Switch. See the figure below.
AC power Grounding screw
Redundant power input
AC power Grounding screw
Redundant power input
Figure 1-5
S3026C Switch rear panel
AC power input range
100 to 240V, 50/60Hz AC. Tolerance range: ±10%