Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run either of the following commands as required:
l
Run:
ipv6 route-static
dest-ipv6-address
prefix-length
{
interface-type
interface-
number
[
nexthop-ipv6-address
] |
nexthop-ipv6-address
} [
preference
preference
|
tag
tag
]
*
[
description
text
]
Static IPv6 routes are configured in a base topology instance.
l
Run:
ipv6 route-static topology
topology-name
dest-ipv6-address
prefix-length
{
interface-type
interface-number
[
nexthop-ipv6-address
] |
nexthop-ipv6-
address
} [
preference
preference
|
tag
tag
]
*
[
description
text
]
Static IPv6 routes are configured in another topology instance.
By default, no static IPv6 routes are configured in a topology instance.
----End
2.3.5 Checking the Configurations
After an IPv6 static route is configured, you can check detailed information about the configured
route.
Prerequisites
An IPv6 static route has been configured.
Procedure
l
Run the
display ipv6 routing-table
command to check brief information about the IPv6
routing table.
l
Run the
display ipv6 routing-table
verbose
command to check detailed information about
the IPv6 routing table.
----End
2.4 Configuring BFD for IPv4 Static Routes on the Public
Network
On an IPv4 network, configuring BFD for IPv4 static routes on the public network can speed
up route convergence and improve network reliability.
2.4.1 Before You Start
Before configuring BFD for static routes, familiarize yourself with the usage scenario, complete
the pre-configuration tasks, and obtain the data required for the configuration.
HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
2 IP Static Route Configuration
Issue 02 (2014-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
100
