Preparing Terminals
5.1
(1) Cable
(2) Heat shrink tubing
(3) DT terminal
(4) Electric hydraulic pliers
(5) Heat gun
Preparing DT
Terminals
(1) Cable
(2) Heat shrink tubing
(3) OT terminal
(4) Electric hydraulic pliers
(5) Heat gun
Preparing OT
Terminals
(1) Cable
(2) Cord end terminal
(3) Crimping tool
Preparing Cord
End Terminals
5
Cable Installation
6
Connection Method
Connecting Cables
5.2
1. Ensure that all circuit breakers, including upstream output circuit breakers, are switched to OFF
before connecting cables.
2. DT and OT terminals must be coated with a heat shrink tubing.
3. After cables are connected, seal the cable inlet and outlet holes using firestop putty.
NOTICE
