CAUTION
Install an output power cable on the PI.
4
Install an input power cable on the PI.
3
Before installing a DC input power cable, identify the positive and negative ends of the
cable. Ensure that the cable is connected correctly. Install a circuit breaker at the negative
end of the external power supply device to prevent circuit loops from damaging the power
cable and PI.
Connect the DC power connector to
the DC power ports.
Install a wire clip over the
shield layer of the DC power
cable.
1
2
Power supply
device
Connected to an RTN 300
(+)
(-)
11
Installation Guide
Installing a PI
Connect the DC power connector to
the DC power ports.
Install a wire clip over the
shield layer of the DC power
cable.
1
2
CAUTION
Before installing a DC output power cable, identify the positive and negative ends of the
cable. Ensure that the cable is connected correctly.
Avoid dropping any metal scraps or other miscellaneous
objects on the front panel or in any ports of the PI.
CAUTION
Avoid dropping any metal scraps or other
miscellaneous objects on the front panel or
in any ports of the PI.
CAUTION
