Terminating a DC Input Power Cable with a Connector
Stripping a Power Cable
A
Use a pair of diagonal pliers to trim off the -48 V power line.
8 mm
Cable core
Strip the 0 V ground line in the same way.
8 mm
Cable core
For the stripping length, see the stripping
indicator on the PI.
NOTE
1
2
3
07
Installation Guide
Installing Cord End Terminals
B
12 mm
10 mm
8 mm
Strip a power cable based on the stripping indicator.
1
Install cord end terminals onto the cable cores.
2
After crimping a cord end terminal, check whether the cable core is exposed
outside the terminal. If the cable core is exposed, recrimp the terminal.
After the power switch is turned on, sparks may be generated at exposed cable
cores when an inappropriate operation is performed.
CAUTION
Crimp all cord
end terminals.
