32/33 >>
Appendix
Installing the Waterproof Socket for the Outdoor Fiber
Appearance of the waterproof socket
a
Thread the outdoor fiber through the shell, rubber
washer, and collar. Insert the rubber washer into the
collar.
Remove the dustproof cap on the flange socket of the
GE(o)/COMBO port and carefully insert the LC/PC
connector of the outdoor fiber into the optical module.
Turn the collar to align it with the slot on the flange
socket and push the socket into the slot to fix the socket
on the flange socket.
Tighten the shell of the waterproof socket.
Ensure that the rubber washer remains in the correct
position in the socket.
Insert the washer side with a V-shaped slot into the
collar. See the following figures. Ensure that the V-
shaped slot securely engages the collar.
The shell is completely tightened when the red O-
ring cannot be seen.
Collar
Rubber washer
Shell
Flange socket of the GE(o)/COMBO port
Red O-ring
Well sealed
Misaligned and
cracked
CAUTION
CAUTION
CAUTION
•Ensure that the V-shaped slot securely engages the collar.
•Ensure that the rubber washer is well sealed. No misalignment or
crack should be observed.
Thread the outdoor fiber through the waterproof socket
b
Optional: Remove the waterproof block at the end of
the rubber washer.
If you only assembly the
waterproof block but do not
route a fiber through it, you do
not need to remove the
waterproof plug.
CAUTION
5
