Huawei ME909u-523 Application Manual Download Page 99

Page: 99 / 104

HUAWEI ME909u-523 LTE LGA Module
Application Guide

FOTA Application Scenarios

Issue 04 (2014-12-08)

Huawei Proprietary and Confidential

^FOTASTATE: 30

^FOTASTATE: 40

Report that the download is in process.

Report that the download is complete.

NOTE

If resumable data transfer is disabled, the download pending due to network disconnection or
TCP link breakoff will be regarded as a download error.

15.8.2

Troubleshooting

Scenario

Possible Error
Information

Solution

The function of
resumable data transfer
is disabled, and the
network or TCP link is
disconnected.

^FOTASTATE: 20,18

Or other download error

The module deletes the
downloaded file and
restores the FOTA state
to idle.

The function of
resumable data transfer
is enabled, and the
module is powered off.

^FOTASTATE: 31

The module prompts that
the download can be
resumed.

15.9 Manually Cancelling the Download

15.9.1

Reference Process

Command

Description

AT^FOTADL=1

Initiate the version download.

^FOTASTATE: 30

Report that the download is in process.

AT^FOTADL=0

Cancel the download, delete the
downloaded file, and restore the FOTA
state to idle.

The command is successfully executed.

AT^FOTASTATE?

Summary of Contents for ME909u-523









































































































Search results

Summary of Contents for ME909u-523

Reviews:

Related manuals for ME909u-523

Brands by name

Popular brands

Huawei ME909u-523, Application Manual

Search results

Summary of Contents for ME909u-523

Reviews:

Related manuals for ME909u-523

Brands by name

Popular brands