Huawei ME909u-523 Application Manual Download Page 82

Page: 82 / 104

HUAWEI ME909u-523 LTE LGA Module
Application Guide

Local Upgrade Application Scenarios

Issue 04 (2014-12-08)

Huawei Proprietary and Confidential

NOTE



After the module reports '

', the host transmits the upgrade package to the module using

the 1K-Xmodem protocol.



Full upgrade only supports on USB PCUI port.

12.1.6

Troubleshooting

If using the full upgrade on some hosts, after the module is restarted, the PCUI port
number may be changed. So you need to find the corresponding port, and then send
the local upgrade package.

12.2 Reporting the Local Upgrade State

12.2.1

Reference Process

Command

Description

AT^FWLOAD=0

The board restarts, and the
upgrade starts.

^FWLSTATE: 90

Report that the local upgrade succeeds.

NOTE

After the data have been transmitted completely and successfully, the MT will not send

the TE.

12.2.2

Troubleshooting

None

Summary of Contents for ME909u-523









































































































Search results

Summary of Contents for ME909u-523

Reviews:

Related manuals for ME909u-523

Brands by name

Popular brands

Huawei ME909u-523, Application Manual

Search results

Summary of Contents for ME909u-523

Reviews:

Related manuals for ME909u-523

Brands by name

Popular brands