Huawei MA5833 Hardware Commissioning Manual Download Page 12 | Manualshive

Page: 12 / 22

background image

5

Adjusting the Signal Level

5.1 Adjusting the CATV Signal Level

5.2 Adjusting the Downstream DOCSIS Signal Level

5.3 Adjusting the Upstream DOCSIS Signal Level

5.1 Adjusting the CATV Signal Level

Step 1

Test the CATV output level on RF OUT test points.

Step 2

Adjust the attenuation brackets to enable the CATV output level to meet the requirement.

l

Adjust the CATV output level through the attenuation bracket on the optical receiver.

l

Alternatively, adjust the CATV output level through the attenuation bracket for the level
of the combined DS and CATV signals on the combiner.

NOTE

When the attenuation bracket for the level of the combined DS and CATV signals on the combiner
is adjusted, the DS output level is adjusted.

----End

The following figure shows the location of the test points and attenuation brackets.

MA5833-DD60
Hardware Commissioning Guide

5 Adjusting the Signal Level

Issue 01 (2018-12-26)

Copyright © Huawei Technologies Co., Ltd.

9

«
...
10
11
12
13
14
...
»

Summary of Contents for MA5833























Reviews:

No comments

Related manuals for MA5833

Brand: D-Link Pages: 3

Brand: D-Link Pages: 12

UniFi Switch Flex

Brand: Ubiquiti Pages: 10

DAP-2590 - AirPremier N Dual Band PoE Access...

Brand: D-Link Pages: 90

DWL-7200AP - AirPremier AG - Wireless Access...

Brand: D-Link Pages: 12

ZoneFlex 7341 802.11n

Brand: Ruckus Wireless Pages: 2

Brand: Linkskey Pages: 8

Brand: 4IPNET Pages: 194

Brand: Linksys Pages: 544

Brand: Acer Pages: 63

Brand: Acer Pages: 38

Predator Connect X5 5G CPE

Brand: Acer Pages: 56

Brand: Acer Pages: 39

Brand: Acer Pages: 7

Brand: Magnum Pages: 2

Brand: OTC Wireless Pages: 1

Brand: Encore Pages: 25

Brand: Encore Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands