4
Commissioning the Output Optical Power
of the Optical Transmitter
NOTE
The following introduces how to use a multimeter to measure the optical power. You can also use an
optical power meter to measure the optical power.
Step 1
Adjust the multimeter for the DC voltage test. Connect the black probe of the multimeter to
the screw on the front panel and connect the red probe to the optical power test point of the
optical transmitter to measure the DC voltage. Obtain the optical power from the following
table based on the measured voltage.
Step 2
The output optical power ranges from 2 dBm to 4 dBm. If the input optical power is out of
this range, replace the optical transmitter.
Output Optical Power (dBm)
V DC (or mW)
4
2.51
3
2
MA5833-DD60
Hardware Commissioning Guide
4 Commissioning the Output Optical Power of the Optical
Transmitter
Issue 01 (2018-12-26)
Copyright © Huawei Technologies Co., Ltd.
7
