Huawei LUNA2000-5-NHE0 User Manual Download Page 4

Page: 4 / 95

Symbol

Description

Indicates warning information about device or environment

security which, if not avoided, could result in equipment

damage, data loss, performance deterioration, or unanticipated

results.
NOTICE is used to address practices not related to personal

injury.

Supplements the important information in the main text.
NOTE is used to address information not related to personal

injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue

contains all the changes made in earlier issues.

Issue 06 (2022-03-01)

Updated

3 Application Scenarios and Settings

Issue 05 (2022-01-20)

●

Updated

1 Safety Precautions

●

Updated

4.3 Determining the Installation Position

Issue 04 (2021-08-17)

●

Updated

1.1 General Safety

●

Updated

8.2 LUNA2000 battery system specifications

Issue 03 (2021-07-10)

●

Updated

4.4.1 Floor-Mounted Installation

●

Updated

7.2 Routine Maintenance

●

Updated

8.2 LUNA2000 battery system specifications

Issue 02 (2021-05-30)

●

Updated

1.1 General Safety

●

Updated

5.3 External Electrical Connections of the Battery

Issue 01 (2021-03-04)

This issue is the first official release.

LUNA2000-(5-30)-NHS0

User Manual

About This Document

Issue 06 (2022-03-01)

iii

Summary of Contents for LUNA2000-5-NHE0
































































































Search results

Summary of Contents for LUNA2000-5-NHE0

Reviews:

Related manuals for LUNA2000-5-NHE0

Brands by name

Popular brands

Huawei LUNA2000-5-NHE0, User Manual

Search results

Summary of Contents for LUNA2000-5-NHE0

Reviews:

Related manuals for LUNA2000-5-NHE0

Brands by name

Popular brands