Huawei LUNA2000-5-NHE0 User Manual Download Page 35

Page: 35 / 95

System Installation

4.1 Checking Before the Installation

NO TE

● Check the appearance of the product before unpacking. If the body of the product is

damaged, contact your dealer and do not install the device.

● Cosmetic damages such as dents and scratches that occur after installation are not

covered by the warranty.

Checking the Outer Packing

Before unpacking the battery, check the outer packing for damage, such as holes

and cracks, and check the battery model. If any damage is found or the battery

model is not what you requested, do not unpack the product and contact your

dealer as soon as possible.

Checking Deliverables

After unpacking the battery, check that the deliverables are intact and complete,

and free from any obvious damage. If any item is missing or damaged, contact

your dealer.

NO TE

For details about the number of deliverables delivered with the battery, see the

Packing List

in the packing case.

LUNA2000-(5-30)-NHS0

User Manual

4 System Installation

Issue 06 (2022-03-01)

Summary of Contents for LUNA2000-5-NHE0
































































































Search results

Summary of Contents for LUNA2000-5-NHE0

Reviews:

Related manuals for LUNA2000-5-NHE0

Brands by name

Popular brands

Huawei LUNA2000-5-NHE0, User Manual

Search results

Summary of Contents for LUNA2000-5-NHE0

Reviews:

Related manuals for LUNA2000-5-NHE0

Brands by name

Popular brands