Huawei IPC6221-VRZ-SP Configuration Manual Download Page 57

Page: 57 / 126

Table 6-5

Parameter description

Parameter

Description

Alarm check interval

Time interval at which the system checks for new alarms. The
system then reports detected alarms to the surveillance platform.

NOTE

The MTU value is an integer ranging from 1 to 256. The default
value of is

Only one alarm is reported if an object keeps moving in the
surveillance range of the camera within a single alarm check interval.
This is to avoid repeated alarms.

Sensitivity

Indicates the sensitivity of motion detection.

NOTE

The MTU value is an integer ranging from 1 to 5. The default value
of is

A larger value indicates higher sensitivity. To detect slight motion, it
is recommended that you set the sensitivity to a larger value.

Step 6

Click

Save

NOTE

To delete a motion detection area, select the motion detection area on the live video image and click

Delete

To delete all motion detection areas, click

Delete all

----End

IPC6221-VRZ-SP
Configuration Guide

6 Setting Video Parameters

Issue 02 (2016-04-06)

Huawei Proprietary and Confidential

Summary of Contents for IPC6221-VRZ-SP































































































































Search results

Summary of Contents for IPC6221-VRZ-SP

Reviews:

Related manuals for IPC6221-VRZ-SP

Brands by name

Popular brands

Huawei IPC6221-VRZ-SP, Configuration Manual

Search results

Summary of Contents for IPC6221-VRZ-SP

Reviews:

Related manuals for IPC6221-VRZ-SP

Brands by name

Popular brands