Huawei FusionModule2000 V500R003C10, Installation Manual, Page: 146 / 318

FusionModule2000 Smart Modular Data Center
Installation Guide
10 Installing the Aisle Containment
Issue 02 (2018-03-31) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
137
Figure 10-48 Door boxes in place
Step 7
Adjust the gaps.
After the door boxes are placed, the gaps between the door boxes and the posts may be
uneven and need to be adjusted, as shown in
Figure 10-49 and Figure 10-51 .
Table 10-8 Door box placement faults
Fault Type Possible Cause Measure
Door box tilted with a
V-shaped gap The top front and rear of the
cabinet are not on the same
level. Usually the front is
higher than the rear. For details about the
adjusting method, see
Step
7.1 .
Door box tilted with a
Λ-shaped gap The top front and rear of the
cabinet are not on the same
level. Usually the front is
lower than the rear. For details about the
adjusting method, see
Step
7.2 .
1. Figure 10-49 shows a tilted door box. Turn the M6 door box screw in the leveling corner
piece furthest from the door frame clockwise to lift the door box until the V-shaped gap
disappears, as shown by (1) in
Figure 10-50 .