Huawei FusionModule2000 V500R003C10, Installation Manual, Page: 131 / 318

FusionModule2000 Smart Modular Data Center
Installation Guide
10 Installing the Aisle Containment
Issue 02 (2018-03-31) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
122
Table 10-6 Sliding door components
No. Name Remarks
1 Aisle door fittings Seal the bottom of a 2000
mm high end cabinet.
2 Posts The door frame consists of
an upper frame mounting kit
and the left and right posts.
3 Upper frame mounting kit
4 Guide rail Hangs a sliding door.
5 Glass doors
Slide rightward and
leftward.
6 Stop blocks at the end of the
guide rail Limit the position of the
door at both ends of the
guide rail.
7 Dampers The dampers are left and
right sensitive.
8 Hanging kits The dampers are left and
right sensitive.
9 Door boxes The door boxes are left,
middle, and right sensitive.
Preparations
Tools: adjustable wrench, torque wrench, Phillips screwdriver, flat-head screwdriver, socket
wrench, step ladder, level
Materials: sliding doors and accessories
Procedure
Step 1
Install the door frame.
1. Pull the post side panel upwards off the clips, as shown by (1) and (2) in Figure 10-32 .
2. Secure the left and right posts to the upper frame mounting kit using eight M6x16 screws,
as shown by (3) in
Figure 10-32 .
 To facilitate assembly, lay the posts and upper frame installation kit on the floor.
 After the assembly is complete, verify that the posts are flush with the upper frame mounting kit.