Figure 4-9 Installing an SMU11C
----End
4.3.3 Installing a Rectifier
Prerequisites
●
The rectifier is intact after being unpacked.
●
The filler panel has been removed from the rectifier slot.
NO TICE
● If the rectifier is damaged, contact your local Huawei office.
● The rectifier slot presents a risk of electric shock. Do not touch the slot with
your hands.
● High temperature is generated around the air exhaust vent when the rectifier is
running. Do not touch the vent with your hands or cover the vent with cables
or other objects.
● In an indoor scenario, you are advised to power on the rectifier within seven
days after unpacking. If the rectifier cannot be powered on in time, place it in
an indoor environment that is dry and without corrosive gas.
● In an outdoor scenario, you are advised to power on the rectifier within 24
hours after unpacking. If the rectifier cannot be powered on in time, place it in
an indoor environment that is dry and without corrosive gas.
Procedure
Step 1 Push the locking latch towards the left.
Step 2 Draw the handle downwards.
Step 3 Gently push the rectifier into its slot along the guide rails.
Step 4 Push the handle upwards.
Step 5 Push the locking latch towards the right to secure the handle.
ETP4860-B1A2 Embedded Power
User Manual
4 Installation
Issue 04 (2021-01-05)
Copyright © Huawei Technologies Co., Ltd.
40
