eSpace IPC 2601(5601)-P
User Guide
6
Parameter Settings
Issue 01 (2012-10-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
54
If the status of a device is online on the client, you cannot configure NTP parameters for this
device.
Step 1
Choose
Settings > Network Configuration > NTP Parameters
.
The page for configuring NTP parameters is displayed, as shown in Figure 6-20.
Figure 6-20
NTP Parameters tab page
Step 2
Set parameters according to Table 6-15.
Table 6-15
Parameter description
Parameter
Description
Setting
Enable NTP
If you select the
parameter, devices on the
network are synchronized
with the server.
[How to set]
To enable the function,
select the check box.
Server IP
IP address of the
platform server.
[How to set]
Enter a value in the text
box.
Synchronization interval
Interval for
synchronizing devices
with the server.
[How to set]
Enter a value in the text
box.
Step 3
Click
Save
.
----End
6.5 Configuring PTZ Parameters
This topic describes how to configure serial port and PTZ parameters.
6.5.1 Configuring Serial Port Parameters
You need to configure serial port parameters to ensure the communication between the
IPC and the PTZ.
