Huawei EMU User Manual Download Page 13

Page: 13 / 70

Changes in the EMU User Guide

This describes the changes in the

EMU User Guide

13 (2009-12-31)

Thirteenth release. The document is modified according to the comments by the testers.

12 (2008-08-20)

Twelfth release. The description of SW-ADDR is modified.

11 (2008-05-20)

Eleventh release. The data cable of the EMU is modified.

10 (2008-04-25)

Tenth release. The illustration of how to connect the infrared sensor is modified.

09 (2008-01-15)

Ninth release. The document title in

About This Document

is modified, and the document

structure is adjusted.

08 (2007-10-30)

Eighth release. The document titles printed on the head page and the header are modified.

07 (2007-09-20)

Seventh release. The description of the power cable and data cable is added.

06 (2007-08-07)

Sixth release. Structural changs are made, some market requirements are met.

05 (2007-04-20)

Fifth release. Indexes are added, parameter description of the self-selected sensors is added.

EMU
User Guide

1 Changes in the EMU User Guide

Issue 13 (2009-12-30)

Huawei Proprietary and Confidential

1-1

Summary of Contents for EMU







































































Search results

Summary of Contents for EMU

Reviews:

Huawei EMU, User Manual, Page: 13 / 70

Search results

Summary of Contents for EMU

Reviews: