Huawei EchoLife HG861 Manual Download Page 16 | Manualshive

Page: 16 / 58

background image

2.1 Product Introduction

This topic provides the appearance and describes the ports and LEDs of the HG861.

HG861 is an indoor optical network terminal (ONT) at the gigabit-capable passive optical
network (GPON) user access layer, designed for home users and SOHO users. Adopting the
GPON technology, the HG861 connects the home users and SOHO users to the Internet through
the optical upstream port.

On the local area network (LAN) side, the HG861 provides abundant hardware ports to meet
multiple networking requirements of home users and SOHO users.

The HG861 supports the ONT management and control interface (OMCI) technology, which
facilitates the automatic service provision remotely by service providers, and the remote
maintenance and management by network maintenance staff.

2.1.1 Appearance

This topic provides the appearance of the HG861.

This topic provides the port appearance of the HG861 and describes the functions of the ports.

This topic provides the LED appearance and describes the indications of the LEDs on the
HG861.

2.1.1 Appearance

This topic provides the appearance of the HG861.

shows the appearance of the HG861.

Figure 2-1

Appearance of the HG861

2 System Overview

EchoLife HG861 GPON Terminal

2-2

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 01 (2009-07-30)

«
...
14
15
16
17
18
...
»

Summary of Contents for EchoLife HG861



























































Reviews:

No comments

Related manuals for EchoLife HG861

Univerge SV8100

Brand: NEC Pages: 44

Brand: Parker Pages: 344

Brand: Data Translation Pages: 60

Brand: YASKAWA Pages: 68

Brand: RadiSys Pages: 44

Brand: EVS Pages: 30

Brand: SIIG Pages: 6

Brand: JUMO Pages: 60

Brand: Comet Labs Pages: 11

Brand: ETAS Pages: 84

Brand: JLCooper Electronics Pages: 12

Brand: Hawking Pages: 21

TGXPS-1080-M12-MV Series

Brand: ORiNG Pages: 2

Brand: Neousys Technology Pages: 24

Brand: uneron Pages: 13

Data Capture Board CLC-CAPT-PCASM

Brand: National Semiconductor Pages: 15

VAR-SOM-MX6 HEAT PLATE KIT

Brand: Variscite Pages: 3

Brand: Behringer Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands