www.4GSource.net
38
Chapter 5 Other Settings
5.1 Changing the IP Address of the LAN of the
HG520s
You can access the Web configuration page of the HG520s
through the IP address of the LAN of the HG520s. The IP address of
the LAN of the HG520s is configured by default, you can change it as
follows:
(1) Log in to the Web configuration page of the HG520s. For the
procedure, refer to "2.3 Establishing Configuration
Environment."
(2) Select
Basic
>
LAN Setting
in the navigation tree to display
the LAN configuration page.
(3) Enter the IP address and the subnet mask in the LAN page.
Click
Submit
.
(4) Confirm the changing operation according to the prompt in
the page.
Note:
z
You need to log in again to use the Web configuration page after
configuring the IP address of the HG520s.
z
Ensure that the IP address of the computer and the IP address of
the HG520s are in the same network segment, then you can access
the Web configuration page.
