Online Help
3 Internet
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
8
3.1.3 Selecting an APN Profile
You can select an APN profile for the CPE to access the Internet.
To set the APN profile, perform the following steps:
1.
Choose
Internet > Network Connection
.
2.
Select a profile from the
Profile
drop-down list.
3.
Click
Submit
.
----End
3.1.4 Selecting PDP Type
You can select a PDP (Packet Data Protocol) to set the dial-up type, perform the following
steps:
1.
Choose
Internet > Network Connection
.
2.
Set
PDP type
to one of the following values described in the following table:
Value
Description
IPv4
Internet Protocol version 4 (IPv4) that is the foundation for current Internet
technologies. Because IP resources are limited, an IP address is shared by
different persons in different time periods, that is, an IP address is not
allocated to only one network subscriber. Thus, the real-name system
cannot be implemented over the IPv4-based networks.
IPv4v6
IPv4-to-IPv6 transition technology that is used when IPv4 and IPv6 coexist.
3.
Click
Submit
.
----End
3.1.5 Setting Data Roaming
To turn roaming on or off, perform the following steps:
1.
Choose
Internet > Network Connection
.
2.
Do as follows:
Select the
Enable
check box behind the
Data Roaming
to turn it on.
Clear the
Enable
check box behind the
Data Roaming
to turn it off.
3.
Click
Submit
.
----End
3.2 APN Management
To create an APN profile, perform the following steps:
