background image

Online Help 

7  Services 

 

 

Huawei Proprietary and Confidential      

Copyright © Huawei Technologies Co., Ltd 

32 

 

3.

 

Click 

Submit

.   

----End 

7.6 Setting DLNA Server   

Digital Living Network Alliance (DLNA) support enables you to access your music, photos 
and videos anywhere, anytime.   

To enable the DLNA server, perform the following steps: 

1.

 

Choose 

Services

 > 

DLNA server

.   

2.

 

Set 

DLNA server

 to 

Enable

3.

 

Click 

Submit

.   

----End 

7.7 Configuring User Settings 

You can add users to the user list to share the files and directories in the USB disk. Using the 
configured account, users can access the FTP server through the FTP client. 

The user list shows the added users and related information, for example, user names, shared 
directories, and permissions. In addition, you can add, edit, or delete the users.   

To add a user to the user list, perform the following steps: 

1.

 

Choose 

Services 

User Settings

.   

2.

 

Click 

Add

.   

3.

 

Set the parameters related to the user.   

4.

 

Click 

Submit

.   

----End 

To modify a user in the user list, perform the following steps: 

1.

 

Choose 

Services 

User Settings

.   

2.

 

Choose the user to be modified, and click 

Edit

3.

 

Modify the parameter settings. 

4.

 

Click 

Submit

.   

----End 

To delete a user from the user list, perform the following steps: 

1.

 

Choose 

Services 

User Settings

.   

2.

 

Choose the user to be deleted, and click 

Delete

Summary of Contents for B593




















































Reviews: