Online Help
5 Wi-Fi
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
20
If
Password length
is set to
64-bit
, the 64-bit encryption key must contain 5 ASCII
characters or 10 hex characters.
9.
Click
Submit
.
----End
5.5 Advanced Settings
Advanced Settings
affect Wi-Fi performance. The settings help you to obtain the maximum
rate through optimal access performance.
To configure the advanced settings, perform the following steps:
1.
Choose
Wi-Fi
>
Advanced Settings
.
2.
Set
Country/Region
.
3.
Set
Channel
.
Auto
indicates that the channel with the best signal quality is selected.
The value
1
to
13
indicates the selected channel.
4.
Set
802.11n bandwidth
.
If this parameter is set to
20MHz
, 802.11n supports only 20 MHz bandwidth.
If this parameter is set to
20/40MHz
, 802.11n supports 20 MHz or 40 MHz
bandwidth.
5.
Set
Transmit power
.
If this parameter is set to
100%
, the Wi-Fi client transmits at full power.
If this parameter is set to
80%
,
60%
, or
40%
, the Wi-Fi client transmits signals at
low power. The Wi-Fi client located far away from the CPE may fail to access the
CPE.
6.
Set
WMM
to
Enable
.
Wi- Fi Multimedia (WMM) is a Wi-Fi Alliance interoperability certification based on the
IEEE 802.11e standard. It provides basic quality of service (QoS) features for IEEE 802.11
networks. WMM prioritizes traffic according to four access categories (AC): voice, video,
best effort, and background. However, WMM does not provide guaranteed throughput. WMM
applies to simple applications that require QoS, such as Voice over IP (VoIP) on Wi-Fi
phones.
7.
Click
Submit
.
----End
5.6 WDS
The CPE supports the wireless distribution system
(
WDS
)
. All Wi-Fi devices in a WDS must
be configured to use the same radio channel, encryption mode, SSID, and encryption key. You
