port link-type trunk
The link type of the interface is set to trunk.
By default, the interface type is hybrid.
Step 4
Run:
port trunk allow-pass vlan
{
vlan-id1
[
to
vlan-id2
] }&<1-10>
The trunk interface is added to a VLAN or multiple VLANs.
By default, VLAN 1 is the default VLAN of a trunk interface.
----End
3.4.4 Adding a Hybrid Interface to a VLAN
Context
Perform the following steps on the AR3200 to add a hybrid interface to a VLAN.
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
interface
interface-type
interface-number
The interface view is displayed.
Step 3
Run:
port link-type hybrid
The link type of the interface is set to hybrid.
By default, the interface type is hybrid.
Step 4
Run one of the following commands depending on the mode being used:
l
To add the hybrid interface to a VLAN or multiple VLANs in tagged mode, run
port hybrid
tagged vlan
{
vlan-id1
[
to
vlan-id2
] }&<1-10>.
l
To add the hybrid interface to a VLAN or multiple VLANs in untagged mode, run
port
hybrid untagged vlan
{
vlan-id1
[
to
vlan-id2
] }&<1-10>.
By default, a hybrid interface is added to VLAN 1 in untagged mode.
----End
3.4.5 (Optional) Specifying the Default VLAN for a Trunk Interface
Context
Perform the following steps on the AR3200 to specify the default VLAN for a trunk interface.
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN
3 VLAN Configuration
Issue 02 (2012-03-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
86
