Context
To locate faults in a bridge group, you can clear the traffic statistics on the Bridge-if interface.
CAUTION
The traffic statistics cannot be restored after being cleared.
Procedure
l
Run the
reset counters interface bridge-if
[
bridge-id
] command in the user view to clear
the traffic statistics on the Bridge-if interface of the bridge group.
----End
2.8 Configuration Example
This section describes the typical application scenarios of transparent bridging and provides
configuration roadmaps.
2.8.1 Example for Configuring Local Bridging
Configuring local bridging allows the communication between the LANs on the same network
segment and in the same geographical location.
Networking Requirements
An enterprise has multiple departments located in the same office building but on different floors.
As business expands for the enterprise, data communication is required between terminals within
the same department, and between some departments. To keep information secure, information
in some departments needs to be isolated from that in the other departments. Users that require
communication with each other need to be added to the same bridge group so that they can
communicate with each other and are isolated from other departments.
, User 1 and User 2 belong to the same department, and both of them
are added to VLAN 11. User 4 and User 5 belong to the same department and are added to VLAN
12. User 3 belongs to another department. User 1, User 2, and User 3 need to communicate with
each other. After bridge groups are created on RouterA, departments in the same bridge group
can communicate with each other and those in different bridge groups are isolated from each
other.
Huawei AR3200 Series Enterprise Routers
Configuration Guide - LAN
2 Transparent Bridging Configuration
Issue 02 (2012-03-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
62
