6
Installing the Router
Before the installation, ensure the following:
Sufficient space has been reserved for the router.
The DIN rail has been fixed.
Pull the fixture on the DIN rail mounting
kit at the back of the router.
1
Place the DIN rail mounting kit onto
the DIN rail and press the fixture to
secure the router on the DIN rail.
2
Scenario 1: Installing the Router on a DIN Rail
Fixture
Scenario 2: Mounting the Router on a Wall
Mark the positions of two mounting
holes on the wall.
1
Installation Method 1
Drill holes for ST4.2 tapping screws on
the wall using a hammer drill with an
appropriate drill bit.
2
The methods for installing, connoting and logging in to the AR-Sc, AR-Se, AR-Sa, AR-So
series routers and AR-PM series UPS
are similar. AR-Sc-Lc-MC is used as an example here.
AR-PM series UPS cannot be mounted on a Wall.
Note
Schindler
PWR
FXS
RS232-0 RS232-1
CAN-0
CAN-1
SIGNAL
DI
Eth0/WAN
BLE/RST
Eth1
Eth2
Eth3
CIL1
CIL2
CIL3
CIL4
Schindler
PWR
FXS
RS232-0 RS232-1 CAN-0
CAN-1
SIGNAL
DI
Eth0/WAN
BLE/RST
Eth1
Eth2
Eth3
CIL1
CIL2
CIL3
CIL4
90°
