7
The torque for an ST4.2 screw is 0.8 N·m.
Hammer hollow wall anchors
into the mounting holes.
3
90°
Hold the bottom of the router and
fix it on the wall with two ST4.2
tapping screws.
4
Installation Method 2
Mark the positions of two mounting
holes on the wall.
1
Drill holes for ST4.2 tapping screws on
the wall using a hammer drill with an
appropriate drill bit.
2
Hammer hollow wall anchors
into the mounting holes.
3
90°
Note
Schindler
PWR
FXS
RS232-0
RS232-1
CAN-0
CAN-1
SIGNAL
DI
Eth0/WAN
BLE/RST
Eth1
Eth2
Eth3
CIL1
CIL2
CIL3
CIL4
105.3mm
pre-mounting hole
90°
