HTP Pro Pulse 220 MTS, Owner'S Manual

Page: 9 / 30

9
HTP RSG 250 PP220 Air-Cooled Spool Gun— If you need some extra distance between yourself and your welding
machine (beyond the reach of the 8’ aluminum gun), or if you cannot avoid flexibility and tight turns of the
connecting cable, a spool gun might just be the right tool for the job. In the past, welders considered spool guns more
a crutch than an actual tool made for professionals. Why? Because, in the past, you could only adjust the wire feed
speed on the spool gun and not the voltage. A voltage adjustment required you to stop welding, climb out and off of
the tank, climb out or off of the trailer, crawl out from under the truck (essentially leave whatever you were welding
on), walk back to the welding machine, adjust your voltage, walk back to what you were welding on, climb back in
place, and resume welding. With the HTP RSG 250 spool gun, all of the above mentioned time-consuming movement
is now a thing of the past! With our USA-Made, state-of-the-art spool gun, we put all of the adjustments right at your
fingertips for you to access while welding; with the HTP RSG 250 PP220 air-cooled spool gun, you no longer need to
climb, walk, or crawl anywhere—simply make the adjustments you want to make where you are and while you are
welding! Hot start? Slope down? Hotter? Colder? No problem! You want to do that in regular spray arc MIG? Single
pulse? Double pulse? No problem either. Our spool gun does what the competition still dreams about...all a reality
here at HTP! Available in a 25’ length.
HTP PPAC 6M 0.9 Air-Cooled Push/Pull Gun— Push/pull guns come in handy when your job requires a lot of
welding and you don’t want to constantly change 1 Lb. aluminum rolls of wire in a spool gun. This is exactly what
our engineers thought when they designed the Pro Pulse 220 MTS. To give you maximum versatility, we designed
the Pro Pulse 220 MTS to accept push/pull systems. HTP offers an 18’ air-cooled push/pull gun, with remote control
capabilities, that plugs directly into the front of your Pro Pulse 220 MTS. And because we have quality in mind on
everything we do, our push/pull system is like the rest of our products...nothing short of excellent. Made in Germany.
Remote Control Options for ALL MIG Guns
Remote control options when MIG welding, especially aluminum since aluminum is an excellent thermal conductor
are VERY critical, gives you the option to do Hot Start, Slope Down (crater fill options), as well as match the
“heat” (output level of the welder; i.e., wire speed and voltage) when welding out-of-position or when welding with
poor fit up; a remote control allows to do this with only one finger, all at the same time, and while welding. On other
machines, you have to stop welding, make adjustments on the machine, and then restart welding. Stops and restarts
create potential leak points and weak points. For example, stress cracks typically originate from a stop or a restart of
the weld. We offer sliding remote controls for your 8’ or 10’ MIG gun. Available as an add-on at any time.