HTP Pro Pulse 220 MTS, Owner'S Manual

Page: 3 / 30

3
Manufacturer’s Warranty
It is expressly agreed that there are no warranties, expressed or implied, made by either the Salesman, Dealer, or HTP
America, Inc. on products or parts furnished hereunder, except the Manufacturer’s Warranty against defective
materials or workmanship as follows:
HTP America, Inc. warrants each new welding machine to be free from defects in material and workmanship under
normal use and service for Three (3) Years after delivery to the original purchaser. HTP America, Inc. will repair and
replace, at its factory, any part or parts thereof. Products should be returned to HTP America, Inc., with transportation
charges prepaid, and which its examination shall disclose to its satisfaction to have been thus defective. This warranty
being in lieu of all other warranties, expressed or implied, and all other obligations or liabilities on its part and it
neither assumes nor authorizes any person to assume for it any liability in connection with the sale of its machines.
This warranty shall not apply to any welding machine which has been repaired or altered by unauthorized service
departments in any way so as, in the judgment of HTP America, Inc., to affect its stability and reliability, nor which
has been subjected to misuse, negligence, or accident.
HTP America, Inc. shall not be liable in any event, unless HTP America, Inc. receives notice of alleged breach of
warranty, actual or constructed, specifying the claimed defect within not more than Thirty (30) Days after discovery.
HTP America, Inc. has reserved the right to make changes in design or add any improvements to its products, at any
time, without incurring any obligation to install the same on equipment.
This warranty is void unless warranty card is sent to HTP America, Inc. within Fifteen (15) Business Days from the
date of purchase.
Exclusions to Warranty:
1. The MIG Welding Gun is warranted for a period of Ninety (90) Days against defects in material and
workmanship.
2. The contact tips, tip holders, gas diffusers, gas nozzles, and liner are consumable items, WHICH CARRY NO
WARRANTY.
Note: This warr anty is to the original purchaser only. The warr anty can be tr ansferred to another owner, with
HTP’s approval, for a warranty transfer fee. HTP America, Inc. must be notified within fourteen (14) days of the sale
and must be provided with the contact information of the original owner, the contact information of the new owner,
and the serial number of the machine.
Safety Suggestions
It is forbidden for people with PACEMAKERS to use or come near the machine.
Electric arc welding produces ultra-violet rays, which are harmful to skin and eyes. Ultra-violet radiation can
penetrate lightweight clothing, reflect from light-colored surfaces, and burn the skin and eyes.
 Wear a heavy, pocket-less, long-sleeved shirt, cuff-less trousers, and high-topped work shoes.

Wear a full-faced welding helmet with a number ten or darker lens and a cap.
Electric arc welding produces flying sparks and hot material, which can cause fire.
 To avoid fire, do not weld on wood, plastic tile, or carpeted floors. Concrete or masonry floors are safest.

Do not weld on pressurized containers.
 Do not weld on drums, barrels, tanks, or other containers until they have been cleared and cleaned as described in
AWS Standard A6.01.
 Do not wear flammable materials.
 Wear non-oily/non-greasy, flameproof welding gloves; the oil or grease on the gloves may ignite.

Avoid having any type of fuel, such as cigarette lighters or matches, on your person as you weld.

Ensure that there is a fire extinguisher in the welding area.